MISSIONS / SERVICE DIMENSIONS
The Service Holder will be responsible for all the dynamic & static umbilical design activities, support to their installation activities and technical matters related to the Venus project, as part of the GPI (‘’Groupe Projet Interne’’) Venus team.
This will include but not be limited to reviewing, approving, preparing and managing all studies and Contractors, Suppliers and Sub-Suppliers documentation related to the Service Holder field of expertise during FEED, Call For Tender and EPCI phases.
The project consists of:
•Production system: 2-off rings, 4-off (~25 km) Steel Lazy Wave Risers (SLWR), 6-off (71km) wet insulated rigid flowlines and 4-off rigid spools in CS and CRA lined pipe (WOL/MLP/HRB), as well as 19-off rigid jumpers in Duplex,
•Gas Injection system: 2-off, 2-off SLWR (~12 km), 2-off (35 km) rigid flowlines in CS and CRA lined pipe (WOL/MLP/HRB), as well as 19-off flexible well jumpers (up to 19km in total length)
•Control system: 2-off dynamic and 27-off static umbilicals, 2-off SDU, 38 XTs and associated FL. and associated subsea structures, equipment and ancillaries, for a very deep-water (>3000m) oil greenfield project.
The Service Holder shall also assist the control system, flow assurance, risers and flowlines design specialists in all matter related to the Service Holder field of expertise (interference issues, chemicals flow assurance, etc...).
The Service Holder will provide support to the SURF Technical Manager and the SURF team and liaise with other project teams (SPS, FPSO & Field Operations).

ACTIVITIES
1.Adopt and demonstrate an exemplary behavior with regards to H3SE&Q, to implement and control H3SE rules and requirements within his area of responsibility. Ensure all flowlines technical documentation and SURF Contractor activities comply with H3SE&Q requirements and highlight any potential deviations. Ensure safe working practices are implemented along all phases of project
2.Adopt and demonstrate an exemplary behavior with regards to the Company Ethics and “Code of Conduct” policy, promote and enforce the Anti-Corruption Program within the Project,
3.Be responsible for all FEED umbilicals engineering activities and manage all FEED contractor technical activities related to his/her discipline. Follow-up FEED studies with regards to umbilicals from Vendors and engineering houses,
4.Be responsible for preparation and timely delivery of the umbilical sub-system (2-off Dynamic Umbilicals and, 27-off static umbilicals) Call For Tender technical package of the SURF EPCI Contract, considering the impact of other SURF/FPSO/SPS sub-systems (Steel Lazy Wave Risers, FPSO mooring lines, future risers/umbilicals development)
5.Be responsible to review, fitness for purpose and compliance to Project and Company requirements of SURF Tenderers Technical offers. Lead the technical clarifications with Tenderers and ensure timely closing of Technical qualifications. Carry out Tenders technical evaluation and support for preparation of RTA technical part,
6.Define, develop, issue and maintain all necessary technical documentation related to the umbilicals design and installation activities. Support and participate to the development and maintenance of Project Management main documents (SOR, FDP, PEP, PQP, Risks, etc.),
7.Ensure follow-up / review / validation of progress performed by SURF Contractor and its Suppliers with regards to his/her disciplines and analyze/report drifts that could occur and propose remedial solutions
8.The Service Holder shall proactively provide alternative designs or technical solutions whenever required, accounting for the various constraints of project packages, such as reducing as much as possible the hook-up and in-place loads to minimize dynamic umbilicals fatigue, mitigate potential clashes with other SURF items (SLWR and mooring lines), assist the Installation Lead to optimize the SLWR/Umbilicals wet parking configurations and sub-sequent transfer activities to FPSO, assist SLWR Engineers in Orcaflex studies, etc…
9.Supervise and control the detailed engineering by timely reviewing the disciplines-related documentation issued by SURF Contractor (technical documentation / queries / derogation requests...), in order to ensure compliance with Project Specifications and Procedures (when applicable), international norms and standards with the objective to ensure respect of the schedule and to optimize costs without impacting required level of Quality and Safety
10.Raise consequently necessary comments and highlight unsafe design, deviations, unacceptable / unjustified design choices, constructability issues
11.Act, as technical referent vis-à-vis Contractor(s) for umbilicals matters, and follow-up the Suppliers providing equipment for the umbilicals, e.g.: bend stiffeners, bend stiffener latching mechanism, bend restrictors, buoyancy, VIV strakes…
12. Ensure technical compliance throughout the Project life of the engineered, procured, fabricated, tested and installed umbilicals. Ensure all technical, QA/QC and H3SE project policies and requirements are duly implemented and ensure Contractors’ compliance with contractual requirements in all areas. Anticipate and ensure adequate and timely reporting to the Technical Manager of any concern, issue or potential deviation. Propose timely and adequate solutions and optimizations.
13.Ensure that his/her work is in line with umbilicals specialists of Company Headquarters,
14.Liaise with other package teams (SPS, FPSO) for interface matters with the support of Interface Managers and leads,
15.Organize and participate to Project Reviews,
16.Assist and support the Technical Manager and the Subsea Manager on all aspects of the umbilicals activities related Call For Tender, Clarification & evaluation process, project execution and contracts management, and with the relations with Partners
17.Coordinate with other Team Members including the SURF contract engineer for the follow-up of correspondence and contract activities throughout the full CFT process and during Project Execution
18.Participate to the Installation Phase, tests, commissioning and handover, assisting, when necessary, the Installation Leader during all the offshore work campaigns.
19.Gather ‘lessons learnt’ and provide feedback to TotalEnergies entities as required. Assist in the formalization of the close-out report

CONTEXT & ENVIRONMENT
The activity takes place in the context of the FEED, Call For Tender, and Project Execution Phase of a major very Deep Water greenfield Project in Namibia. The Venus GPI is a multidisciplinary team that coordinates the development studies managed by TotalEnergies OneTech on the Deep-Water discoveries of offshore Namibia Block 2913B.
The technical challenges the GPI / Project will face are the reservoirs development and management, the subsea production/injection system definition in a challenging environment.
The Venus Project will be developed with the objectives to maximize economical results by optimizing the reserves, the schedule, reducing the costs and the Greenhouse Gas (GHG) emission, while maintaining the technical quality of the installations, with high H3SE requirements and focus.

DURATION / LOCATION
•Starting date: May 2025
•Duration: 1 year minimum to 3 years
•Renewable: Yes
•Location: FRANCE / Paris, then at Contractor engineering site during Project execution in Europe.
•Status: Residential

QUALIFICATIONS & EXPERIENCE REQUIRED
•Qualification: Master’s degree in engineering,
•Languages: English
•Experience within project: at least 10 years in large offshore oil & gas SURF very deep water projects and experience in umbilical design on an EPCI project. Very strong experience in dynamic umbilicals design and fabrication mandatory.
•Additional features:
oGood knowledge of relevant codes (DNV), and preferably of TotalEnergies General Specifications, procedures and policies.
oPrevious experience with Major SURF Contractors during project execution for deep water project and follow-up of the engineering and procurement of umbilicals,
oPrevious experience with Umbilical Manufacturing Supplier,
oPositive, constructive, proactive and pragmatic mindset.
oAbility to work within large teams with other parties (Contractors, suppliers, HQ technical teams, etc).
oPrevious experience within a complex and multicultural working environment